Determination of lanthanum and cerium in cmsx-4 nickel-based superalloys by inductively coupled plasma mass spectrometryEI北大核心CSCD

CMSX-4 is the second-generation nickel-based single crystal superalloy used widely in the world. The oxidation resistance and corrosion resistance of CMSX-4 alloy can be improved by adding trace lanthanum (La), cerium (Ce) and other rare earth elements. A method for the simultaneous determination of La and Ce in CMSX-4 nickel-based superalloy by wet dissolution-inductively coupled plasma mass spectrometry was established. The sample was heated and dissolved under normal pressure by aqua regia and hydrofluoric acid, and the interference of fluorine ion was eliminated by using perchloric acid. The amount of dissolved acid and the digestion conditions were optimized. The limits of detection were 0.23 μg/g for La and 0.85 μg/g for Ce under optimized conditions. The spiked recoveries were 95.0%–98.9% with the relative standard deviations of 1.3%–3.9%, which can meet the requirements of accurate and rapid determination of La and Ce in CMSX-4 nickel-based superalloy. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Hydrogen Peroxide Production of Individual Nanosecond Pulsed Discharges Submerged in Water of Elevated Conductivity

The production of hydrogen peroxide (H₂O₂) is a key parameter for the performance of pulsed discharges submerged in water utilized as advanced oxidation process. So far, any related assessment of the underlying mechanism was conducted for the application of several hundred discharges, which did not allow for a correlation with physical processes. Moreover, the production was rarely investigated depending on water conductivity as one of the most important parameters for the development of submerged discharges. Accordingly, hydrogen peroxide generation was investigated here for individual single discharge events instigated with 100 ns high-voltage pulses in water with three different conductivities and was associated with the discharge development, i. e. spatial expansion and dissipated electrical energy. The approach necessitated the improvement of an electrochemical flow injection analysis based on the reaction of Prussian blue with H₂O₂. Hydrogen peroxide concentrations were quadratically increasing with propagation time and stable for different water conductivities. H₂O₂ production per unit volume of a discharge was constant over time with an estimated rate constant of 3.2 mol ⋅ m⁻¹ s⁻¹, averaged over the crosssectional area of all discharge filaments. However, the individually dissipated energy increased with conductivity, hence, the production efficiency decreased from 6.1 g ⋅ kWh⁻¹ to 1.4 g ⋅ kWh⁻¹, which was explained by increased resistive losses within the bulk liquid.     

Selective extraction of apixaban from plasma by dispersive solid-phase microextraction using magnetic metal organic framework combined with molecularly imprinted polymer nanocomposite

This research aims to synthesize a specific and efficient sorbent to use in the extraction of apixaban from human plasma samples and its determination by high-performance liquid chromatography-tandem mass spectrometry. High specific surface area of metal-organic framework, magnetic property of iron oxide nanoparticles, selectively of molecular imprinted polymer toward the analyte, and the combination of dispersive solid-phase extraction method with a sensitive analysis system provided an efficient analytical method. In this study, first, a molecularly imprinted polymer combined with magnetic metal organic framework nanocomposite was prepared and then characterized using different techniques. Then the sorbent particles were used for selective extraction of the analyte from plasma samples. The efficiency of the method was improved by optimizing effective parameters. According to the validation results, wide linear range (1.02–200 ng mL⁻¹), acceptable coefficient of determination (0.9938), low limit of detection (0.32 ng mL⁻¹) and limit of quantification (1.02 ng mL⁻¹), high extraction recovery (78%), and good precision (relative standard deviations ≤ 2.9% for intra- (n = 6) and interday (n = 6) precisions) were obtainable using the proposed method. These outcomes showed the high potential of the proposed method for screening apixaban in the human plasma samples.     

电感耦合等离子体质谱(ICP-MS)法结合化学计量学分析比较6种松针中无机元素的含量

摘 要 为研究甘肃地区松针中无机元素的含量,探究不同品种松针中无机元素的差异,采用HNO3(65%)对松针样品进行微波消解,电感耦合等离子体质谱(ICP-MS)法测定甘肃两地区6种松针中28种无机元素的含量,结合主成分分析以及偏最小二乘判别分析对松针地区差异进行判别;结果显示松针中无机元素含量丰富,其中Na、Mg、Al、K、Ca、Fe、Zn、Mn、Sr等元素在不同品种松针中均有较高含量,主成分分析结果显示共有7个主成分,累积贡献率达到92.58%,偏最小二乘判别分析显示两地区6种松针在地区上可被明显分开,其中Mg、Fe、Zn、Mn、Sr、K 6种元素为造成地区差异的主要元素。实验结果表明松针中元素种类丰富,人体必需微量元素含量较高,且不同地区松针在地区上具有一定的一致性和特异性。     

电感耦合等离子体质谱（ICP-MS）法测定黄精中15种稀土元素及其指纹图谱绘制

为了准确测定黄精中稀土元素的含量,采用电感耦合等离子体质谱（ICP-MS）法同时测定黄精中15种稀土元素（La、Ce、Pr、Nd、Pm、Sm、Eu、Gd、Tb、Dy、Ho、Er、Tm、Yb、Lu）的含量,进而绘制稀土元素指纹图谱,以稀土元素含量的平均值构建黄精稀土元素标准指纹图谱,作为鉴定黄精中药材的参考依据。黄精样品采用微波消解法处理后,通过在线引入内标溶液,采用ICP-MS法测定15种稀土元素的含量,采用OriginPro 2021绘制稀土元素指纹图谱和进行主成分分析,采用SPSS 26.0进行聚类分析。15种稀土元素的线性关系、重复性、精密度良好,平均加标回收率在97.0%~103.3%,相对标准偏差小于等于1.74%。黄精中Ce、La、Nd含量相对较高,Ce含量为53.02～2004.58 μg/kg,位居第一。聚类分析和主成分分析结果表明,样品聚为2类,同一产地的样品能够较好地聚在一起。黄精药材中15种稀土元素的指纹图谱具有相似的分布形态,具有较强的特征性和一致性,相似度均大于0.950。该方法操作简单,准确可靠,能满足实验分析要求,可为黄精的质量控制和药理研究提供参考;建立的指纹图谱可用于黄精的鉴别。     

氟化铵快速分解－电感耦合等离子体质谱法测定地球化学样品中的稀土元素

测定地球化学样品中的微量稀土元素常用混酸分解法或碱熔融法,这些常规方法往往存在耗费试剂量多、基体效应大、操作周期长等缺点。本文采用氟化铵作熔剂,在旋盖聚四氟乙烯坩埚中220℃熔融样品,后采用2毫升硝酸和0.5毫升高氯酸、硫酸（1+1）在电热板上继续分解,建立了氟化铵分解 －电感耦合等离子体质谱法测定岩石、土壤和水系沉积物中15种微量稀土元素的分析方法。本方法能快速、有效地分解样品,经三种国家标准物质验证（岩石、土壤、水系沉积物）,方法的准确度ΔlgC在0.001～0.02之间,测定值与认定值相符。方法检出限为0.001～0.04μg／g之间,精密度RSD%在1.11％ ～4.85％之间,能够满足微量稀土元素的分析要求,方法具有简单快捷、消耗试剂少、检出限低、精密度与准确度好等特点,适合于地球化学等地质样品微量稀土元素的批量快速分析测定。     

电感耦合等离子体质谱(ICP-MS)法测定土壤中的碘

通过电感耦合等离子体质谱法(ICP-MS)测定土壤中的碘。样品预处理采用艾斯卡试剂熔融、热水提取和阳离子树脂静态交换,试验加入了不同剂量的阳离子交换树脂在不同程度上降低了溶液中Na+ 和Zn2+^{等阳离子的盐效应干扰。研究了乙醇在}ICP-MS中对碘元素的增强效应,用3%的氨水溶液清洗进样系统,有效减少的碘的记忆效应和清洗时间。该方法线性范围宽,方法灵敏度高,检出限低,试剂用量少,环境友好。对苏州及周边区域若干非污染土壤点位进行采样、制备和测试,碘平均含量为2.7μg.g_-1^;同步测试国家有证标准物质,精密度和准确度良好。     

酸溶-电感耦合等离子体发射光谱法测定白云石和菱镁石中主次元素

利用电感耦合等离子体原子发射光谱仪( ICP-AES)建立白云石和菱镁石中铝、钙、铁、镁、锰、磷、硅、锶的测定方法。研究了酸体系、温度及消解方式对试样消解的影响,结果表明,使用5 mL盐酸和硝酸混合酸(1：3)-0.75 mL氢氟酸-5 mL水以密闭消解的方式在150 ℃下消解白云石和菱镁石30min,并以2mL饱和硼酸络合多余的氢氟酸,可以得到澄清消解液。通过白云石和菱镁石中铝、钙、铁、镁、锰、磷、硅、锶的谱线干扰情况,选择Al 308.215 nm、Ca 318.127 nm、Fe 261.187 nm、Mg 277.983 nm、Mn 257.61 nm、P 213.618 nm、Si 251.611 nm、Sr 421.552 nm作为分析线,各元素的校准曲线在线性范围内线性关系良好,相关系数均不小于0.999。按照实验方法测定白云石和菱镁石标准物质,各元素结果的相对标准偏差 (RSD, n=6)为0.89~3.19%,测定值与认定值无显著性差异。本方法有效解决了白云石和菱镁石快速有效溶解及准确测定问题。     

阳离子树脂交换分离-电感耦合等离子体质谱(ICP-MS)法测定地质石膏样品中硼

硼石膏近些年在水泥、沥青混合材料等领域应用广泛,其主要成分为CaSO4·2H2O和B2O3以及其他杂质,因此准确、快速测定石膏样品中的硼元素对石膏的应用、资源综合利用等方面具有重要意义。而国家标准GB/T 5484-2012《石膏分析方法》中并没有硼元素的化学分析方法,且相关文献报道也很少。目前测定硼元素主要采用电感耦合等离子体质谱法（ICP-MS）,样品前处理多采用酸溶法,而碱熔法应用不多,主要原因是碱熔后溶液中产生大量盐分影响等离子体焰的稳定性,而732型阳离子交换树脂能吸附大量的钠离子,同时吸附了钙、镍、铁及稀土等阳离子,减少盐分干扰。基于此原理,本文采用氢氧化钠碱熔-732型阳离子交换树脂交换分离,在线加入铑内标的方式,建立了ICP-MS法测定石膏中硼的方法,同时由于石膏国家标准物质不包含硼元素的含量,采用高纯硫酸钙分别与岩石标准物质、水系沉积物国家标准物质和土壤国家标准物质混合配置成人工标准物质,并讨论了熔矿体系、阳离子加入量与吸附时间、清洗液、同位素的选择等实验条件。本方法的检出限为0.76μg/g,精密度（RSD,n=7）为0.9%~1.7%,相对误差为1.56%~3.96%,加标回收率在97.5%~102%,该方法快速、准确,记忆效应小,适合石膏中硼元素的测定。     

超级微波消解-电感耦合等离子体发射光谱（ICP-OES）法测定土壤中18种元素

为提高土壤多元素同时检测的效率,采用超级微波消解-电感耦合等离子体发射光谱法测定土壤中钾、钠、钙、镁、铜、铁、锰、锌、磷、硫、硼、砷、镉、铬、铅、钴、镓、锂等18种元素含量。比较了超级微波消解、常规微波消解和电热板消解的处理效果,采用超级微波消解法对样品进行前处理,并优化了消解条件。在最优条件下,各元素的检出限在0.05~20 mg/kg,加标回收率在86.2%~107.5%,RSD在0.1%~3.0%,方法准确度及精密度可以满足多元素同时测定的需求,且该方法具有简单、快速、成本低、用酸量少、重现性好等特点。